Create a System
Building a system is simple
An AV over IP system with Just Add Power can be as creative and unique as you want it to be. Our feature set allows you to combine single screen displays and video walls for eye-catching implementations and practical installations, and our AMP software makes it simple to set up.
Benefits
Build Excellence
Perfect synchronization
Distribute video across individual screens and video walls mounted throughout your room or facility. All of the screens playing the same source will be perfectly in sync.
Flexible system size
Any number of sources can be distributed to any number of screens, with distances up to 100 meters .
Easy setup
Simply plug a transmitter into each source and a receiver into each display, then connect all of the devices into a network switch. Configure your system using our AMP software by following all of the prompts, and the Just Add Power devices are ready to go.
01 Connect the Transmitters
Each source in your system will be connected by HDMI cable to a transmitter. The transmitter will encode the source content and send it through your network to the layer three ethernet switch.
02 Connect the Receivers
Next, receivers are connected to each display using HDMI cable. The receivers accept the encoded content routed to them from the switch and decode it for the display to play at the correct resolution and HDR settings.
03 Gigabit Switch
A gigabit switch is used to direct the source content to the intended displays. Just Add Power works with high quality switch manufacturers to ensure interoperability. Multiple switches may be used to expand the number of sources and displays in your system. Just Add Power devices are connected to the switch using Cat5 or higher cable. Fiber cable is supported in the MaxColor product line.
04 Control System
With our supported control systems, you can trust that you are getting the best possible technology and support for your AV over IP needs. We provide free drivers for popular control systems and an easily accessible aPI.
05 Configuration
Our configuration software, Advanced Matrix Programmer (AMP) takes you step by step through the process of configuring your Just Add Power devices.
Expand A System
It’s easy to add new components to an existing Just Add Power System.
