Just Add Power
Your Shopping Cart
Products HDMI over IP Technologies 2G HD over IP Rackmount Transmitter
 View Full-Size Image |
2G HD over IP Rackmount Transmitter |
|||||
|
Price:
$1,999.00
|
||||||
| Ask a question about this product | ||||||
One of the primary goals of the 2G HD over IP solution was to significantly improve the video quality in comparison to the already popular and well received 1G solution. The objective is to deliver distributed HD video plus multichannel audio over the LAN that is visually identical to the source content. In order to achieve this visually lossless objective it is necessary to move from a 100BT network architecture to a 1000BT platform. This 1000% increase in specified network speed gives us the necessary bandwidth to deliver an uncompromised 1080p video signal. The end result is the ability to replicate stunning 1080p video that cannot be distinguished from the source content, allowing Custom Installers to satisfy the video quality demands of the most demanding clients. 2G HD/IP Rackmount Transmitter Specifcations (VBS-HDIP-439A) 3 UTP/STP 1000Mbps Ethernet Port
NOTICE: HD over IP and HD/IP are global trademarks or registered trademarks of Just Add Power Cardware Co., Inc. HDMI™, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. 2-Way RS232 Device Control and Mounting Wings All 4 of the 2G models have an unexpected bonus capability - RS232 control ports. So, in addition to being able to build an any-sized HD over IP matrix, these devices also will allow the custom installer to send/receive 2-way RS232 commands to any devices attached to the matrix. This includes the ability to control all of the attached displays using RS232 or via IR using a variety of readily available and easily supported RS232 to IR interfaces. The other surprise feature in the finished models shown here are the integrated mounting wings. Both of these bonus features (RS232 and integrated mounting wings) are targeted to the needs and demands of the CEDIA installer. The last significant difference between the 1G and 2G solution is the elimination of the scaler function in the HD over IP Receiver. While many customers have benefited from the scaler function in the 1G family, it has also been an occasional problem for some high end installations. This is due to a combination of factors such as undesirable EDID settings in some screens and double scaling. Furthermore, the scalers integrated into the high end monitors installed by professional installers often have a far superior range of features. The introductory 2G HD over IP Receivers will not provide any sort of scaling function at all. Instead, the original video signal that is connected to the 2G HD over IP Transmitter will be output at the source resolution. This change will make it necessary for the installer to ensure that the selected screens for a 2G HD over IP solution are able to support the video signal resolution settings of the distributed source devices. Managed Ethernet Switches we have tested and found to be compatible with the Just Add Power HD over IP solution include the following: 1G Systems: Cisco SG Series (SG300 or SG500) - best switch choice on this list 2G Systems (requires Gigabit for best results): Cisco SG Series (SG300 or SG500) - best switch choice on this list Home automation drivers have been written for many of these switches. These drivers are specific to the switch make/model and must often be customized to deliver the desired results. Please call us with the details on the home automation platform you intend to use to see if a driver has already been written to support a certain switch. We have drivers available for several platforms, including AMX, Crestron, Control4, Pronto, RTI, Savant, URC, and Vantage, with more being developed all the time. Video Wall configurations are possible using 2 or more 2G Receivers and the 2G Video Wall App, |
||||||
|
Availability
Usually ships in:  |
||||||
You may also be interested in this/these product(s)
|
||||||
The 2G Just Add Power HD over IP device are available in the same 4 form factors as the 1G family (Standard Transmitter, Convertible Rackmount 3X Transmitter, Standard Receiver, and PoE Receiver), with additional form factors being developed and expected to be available in the near future. Questions regarding the 2G HD over IP solution can be directed via email to sales @ justaddpower.com . Dealers are strongly encouraged to contact their regional HD over IP distributor representatives with any product or pricing questions they may have.
Download an HDMI over IP Specifications Sheet
Our Technologies
HDMI over IP TechnologiesList All Products |
|
|
Advanced Search |
|
| Forgot your password? | |
| Forgot your username? | |
| No account yet? Register | |
|
|
Currency Selector
