Just Add Power - Latest Products from Category: Home Theater

1G HD over IP Mounting Wings

Tue, 17 Aug 2010 16:34:01 +0100

A complete set of 10 professional mounting wings for use with 1G HD over IP Transmitters and Receivers, including PoE Receivers.

Includes 20 extended machine screws for easy installation.

Now your 1G HDMI over IP installation can have the same professionally installed look as the new 2G models!

When using 1 wing per transmitter/receiver this kit can be used to install 10 devices. When using 2 wings per transmitter/receiver, this kit can be used to install 5 devices.

NOTICE: HD over IP and HD/IP are global trademarks or registered trademarks of Just Add Power Cardware Co., Inc. HDMI™, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Price: $50.00

1G HD over IP Receiver

Fri, 01 Jan 2010 14:30:49 +0100

Download an HD over IP Projector Connector Specifications Sheet

The Projector Connector™ HDMI/IP™ allows you to simultaneously send out an HDMI® 1.3 Signal (up to 1080p) to one or more HDMI™ video projectors or LCD Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. Can be used to distribute HD digital content from multiple sources to up to 200 remote displays on a LAN by cascading Ethernet switches, , allowing the farthest display to be located 1,000’s of feet away from the 1080p source device while sustaining excellent picture & sound quality. Each device is installed using 1 piece of UTP or STP cable. AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss. The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different output displays can be at different resolutions). The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

NOTE: Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support 1 transmitter.

Not an HDMI Balun, but an HDMI over IP system. This means you can create your own A/V Ethernet network and all of the recievers will find the transmitter automatically. It may even be used over smaller existing house networks and low cost LAN switches and routers.

Many-to-Many Home Theater Matrix

Any HDMI source can simultaneously be diplayed on any number of display devices (if multiple displays are permitted by the HDMI source) using VLAN isolation on a Managed Ethernet switch. Using the HTTP GUI a PC (wired or wireless) can control what signal is being watched at each location. Sophisticated Home Theater installations can use a programmable console to control the system using RS232 commands. The Managed switch must support IGMP and permit duplicate IP addresses across the VLAN domains. You must use a third party home automation solution to provide distributed remote control functionality.

Projector Connector™ HD/IP Receiver Specifcations (VBS-HDMI-108A)

1 UTP/STP 100Mbps Ethernet Port
1 HDMI Out (19 pin Type A female)
Protocol: IP, UDP, TCP, ICMP, and IGMP
1 3.5mm IR IR Transmitter Port (limited support)
Size: 5” W x 4.5” D x 1” H; 1.1 pounds
100-240V, 50/60 Hz, 5v DC Adapter - 1 Amp
HDCP Compliant
Plug-and-Play installation
Supports DVI with HDMI-to-DVI adapter
Scaler automatically adjusts for each display
Video Bandwidth: 2.25Gbps (HDM1.3)
LAN Bandwidth: 50Mbps ~ 60Mbps for 1080p
Input TMDS Signal: 1.2 volts (peak-to-peak)
Input DDC Signal: 5 volts (peak-to-peak)

Resolutions - supports practically any input resolution and frequency from 16 x 16 to 2048 x 2048 pixel image including the following popular settings (NOTE the integrated scaler will automatically adjust the HDMI output to match the preferred resolution setting reported by the HDMI attached monitor):
640x480 @ 85fps 800x600 @ 85fps
1024x768 @ 75fps 1280x1024 @ 30fps
1600x1200 @ 30fps 720x480 @ 60fps
720x576 @ 50fps 1280x720 @ 30fps
1920x1080 @ 24fps 1920x1080 @ 60fps

Download an HD over IP Projector Connector Specifications Sheet

MediaSwitcher Pro License

Sat, 17 Jul 2010 13:42:52 +0100

Just Add Software, LLC's MediaSwitcher™ Pro provides for fast and easy switching of video sources in a Just Add Power HD over IP™ matrix. Ideal for use in any application where the user desires control of the video matrix via TCP/IP, it can be used as a standalone system or it is compatible with any of the RS-232 based integrated control systems and can be used alongside them as a supplemental control system. TCP/IP offers the advantages of speed and also that control of the matrix can be performed from anywhere on the network, via wired or wireless connections. This allows greater control and flexibility for managing the switch. Pro Version 1.1 adds support for any sized video matrix with unlimited sources and screens (Just Add Power Gen1 systems limited to 200 screens). Currently switches from Cisco, Dell, Linksys, Netgear and D-Link are supported with plans to add more in the future.

Features of MediaSwitcher:

- Runs on Windows, Mac or Linux
- Supports an unlimited number of video sources
- Supports up to 200 screens for Gen 1 Just Add Power installations or unlimited screens for Gen 2 Just Add Power installations
- Supports an unlimited number of presets - a predefined source assignment for desired screen in the installation
- Supports an unlimited number of sequences - a sequences is a set of up to 20 presets that execute sequentially at given time intervals, time of day or both
- Provides a utility to automatically configure the VLANs on the switch and programs each port on the switch for optimal performance
- Supports switches from Cisco, Dell, Linksys, Netgear and D-Link with more to come
- Supports activation of controls via key pad entry allowing source, preset or sequence changes to be made from a remote keypad.
- Features a utility to reset individual ports on the switch should they require it.
- Features the ability to save a default configuration to the switch - allows the switch to come up with a default configuration in the event of a power failure/restart
- Fully supports PoE and features the ability to turn individual or all Just Add Power PoE receivers on or off
- Configuration files are comma delimited text files allowing a master template to be created for multiple sites - this template can then be loaded at each site for rapid deployment
- Ability to add custom branding/logos to the main user interface

System Requirements:

- Runs on nearly any modern platform - program uses minimal resources
- Minimum required screen width is 1024 pixels
- Mac platform requires OS X 10.4 or newer - PowerPC or Intel supported
- Windows platform requires Windows 2000 or newer

MediaSwitcher™ was developed by Just Add Software, LLC in cooperation with Just Add Power. This licensed software is based on Just Add Software's intellectual property and/or copyrighted content. This software is intended solely for use with Just Add Power devices by Just Add Power customers or dealers who have purchased their Just Add Power HDMI™ over IP equipment through authorized support channels. Any unauthorized use is strictly prohibited and will be prosecuted by Just Add Software and/or Just Add Power as violations of our copyrights and as theft of our confidential intellectual property.

Use of this software constitutes acceptance of the accompanying license agreement. Please read the license agreement prior to using this software.

NOTICE: HDMI™, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Price: $1,000.00

1G HD over IP Transmitter

Fri, 01 Jan 2010 14:20:21 +0100

Download an HD over IP Projector Connector Specifications Sheet

The Projector Connector™ HD/IP™ allows you to simultaneously send out an HDMI® 1.3 Signal (up to 1080p) to one or more HDMI™ video projectors or LCD Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. Can be used to distribute HD digital content from multiple sources to up to 200 displays on a LAN by cascading Ethernet switches, allowing the farthest display to be located 1,000’s of feet away from the 1080p source device while sustaining excellent picture & sound quality. Each device is installed using 1 piece of UTP or STP cable. AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss. The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different output displays can be at different resolutions). The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

NOTE: Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support 1 transmitter.

Many-to-Many Home Theater Matrix

Projector Connector™ HDMI/IP Transmitter Specifcations (VBS-HDMI-308A)

1 UTP/STP 100Mbps Ethernet Port
Embedded HTTP Server
Protocol: IP, UDP, TCP, ICMP, and IGMP
1 HDMI In (19 pin Type A female)
1 3.5mm IR Receiver Port (limited support)
Size: 5” W x 4.5” D x 1” H; 1.1 pounds
100-240V, 50/60 Hz, 5v DC Adapter - 1 Amp
HDCP Compliant
Plug-and-Play installation
Supports DVI with HDMI-to-DVI adapter
Video Bandwidth: 2.25Gbps (HDM1.3)
LAN Bandwidth: 50Mbps ~ 60Mbps for 1080p
Input TMDS Signal: 1.2 volts (peak-to-peak)
Input DDC Signal: 5 volts (peak-to-peak)

Resolutions - supports practically any input resolution and frequency from 16 x 16 to 2048 x 2048 pixel image including the following popular settings:
640x480     @ 85fps    800x600     @ 85fps
1024x768   @ 75fps    1280x1024 @ 30fps
1600x1200 @ 30fps    720x480     @ 60fps
720x576     @ 50fps    1280x720   @ 30fps
1920x1080 @ 24fps    1920x1080 @ 60fps

Download an HDMI over IP Projector Connector Specifications Sheet

Price: $350.00

MediaSwitcher Standard License

Sun, 09 May 2010 15:41:12 +0100

Just Add Software, LLC's MediaSwitcher™ Standard provides for fast and easy switching of video sources in a Just Add Power HD over IP™ matrix. Ideal for use in any application where the user desires control of the video matrix via TCP/IP, it can be used as a standalone system or it is compatible with any of the RS-232 based integrated control systems and can be used alongside them as a supplemental control system. TCP/IP offers the advantages of speed and also that control of the matrix can be performed from anywhere on the network, via wired or wireless connections. This allows greater control and flexibility for managing the switch. Standard Version 1.1 adds support for up to an 8x8 video matrix (the Pro version supports with unlimited sources and screens)Currently switches from Cisco, Dell, Linksys, Netgear and D-Link are supported with plans to add more in the future.

Features of MediaSwitcher Standard:

- Runs on Windows, Mac or Linux
- Supports up to 8 video sources
- Supports up to 8 screens
- Supports an unlimited number of presets - a predefined source assignment for desired screen in the installation
- Supports an unlimited number of sequences - a sequences is a set of up to 20 presets that execute sequentially at given time intervals, time of day or both
- Provides a utility to automatically configure the VLANs on the switch and programs each port on the switch for optimal performance
- Supports switches from Cisco, Dell, Linksys, Netgear and D-Link with more to come
- Supports activation of controls via key pad entry allowing source, preset or sequence changes to be made from a remote keypad.
- Features a utility to reset individual ports on the switch should they require it.
- Features the ability to save a default configuration to the switch - allows the switch to come up with a default configuration in the event of a power failure/restart
- Fully supports PoE and features the ability to turn individual or all Just Add Power PoE receivers on or off
- Configuration files are comma delimited text files allowing a master template to be created for multiple sites - this template can then be loaded at each site for rapid deployment
- Ability to add custom branding/logos to the main user interface

System Requirements:

Use of this software constitutes acceptance of the accompanying license agreement. Please read the license agreement prior to using this software.

NOTICE: HDMI™, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Price: $149.00

1G HD over IP Rackmount Transmitter

Fri, 01 Jan 2010 14:39:12 +0100

Download an HD over IP Rackmount Transmitter Specifications Sheet

Watch the video at http://www.youtube.com/watch?v=wvJ6yeiRIPE to see the Convertible design.

The Projector Connector™ Convertible HD over IP™ Rackmount Transmitter allows you to simultaneously send out 3 different HDMI® 1.3 Signals (up to 1080p) to one or more HDMI video projectors or LCD Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. Can be used to distribute HD digital content from multiple sources to up to 200 displays on a LAN by cascading Ethernet switches, allowing the farthest display to be located 1,000’s of feet away from the 1080p source device while sustaining excellent picture & sound quality. Each device is installed using 1 piece of UTP or STP cable. AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss. The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different output displays can be at different resolutions). The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

NOTE: Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support 1 transmitter.

Many-to-Many Home Theater Matrix

Any HDMI™ source can simultaneously be diplayed on any number of display devices (if multiple displays are permitted by the HDMI source) using VLAN isolation on a Managed Ethernet switch. Using the HTTP GUI a PC (wired or wireless) can control what signal is being watched at each location. Sophisticated Home Theater installations can use a programmable console to control the system using RS232 commands. The Managed switch must support IGMP and permit duplicate IP addresses across the VLAN domains. You must use a third party home automation solution to provide distributed remote control functionality.

Projector Connector™ HD/IP™ Rackmount Transmitter Specifcations (VBS-HDMI-338A)

3 HDMI In (19 pin Type A female) plus 3 UTP/STP 100Mbps Ethernet Ports; Size: 1 RU 19” Wide
Embedded HTTP Server - Protocol: IP, UDP, TCP, ICMP, and IGMP; 3 3.5mm IR Receiver Port **
IEC 100-240V, 50/60 Hz Switching Power Supply; HDCP Compliant; Plug-and-Play installation
Supports DVI with HDMI-to-DVI adapter; Video Bandwidth: 2.25Gbps (HDM1.3)
Input TMDS Signal: 1.2 volts (peak-to-peak); Input DDC Signal: 5 volts (peak-to-peak)
Maximum LAN Bandwidth: 50 ~ 60 Mbps per port
Resolutions - practically any input from 16 x 16 to 2048 x 2048 pixels including the following:

640x480     @ 85fps    800x600     @ 85fps
1024x768   @ 75fps    1280x1024 @ 30fps
1600x1200 @ 30fps    720x480     @ 60fps
720x576     @ 50fps    1280x720   @ 30fps
1920x1080 @ 24fps    1920x1080 @ 60fps

Compatibilty - works with the 1G HDMI over IP Receiver series.

Download an HD over IP Rackmount Transmitter Specifications Sheet

Price: $1,299.00

1G HD over IP Power over Ethernet Receiver

Thu, 04 Mar 2010 18:11:37 +0100

Download an HD over IP Projector Connector Specifications Sheet

The 1G HD over IP™ Power over Ethernet Receiver is part of the Projector Connector™ HDMI/IP™ family which allows you to simultaneously send out an HDMI® 1.3 Signal (up to 1080p) to one or more HDMI video projectors or LCD Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. Can be used to distribute HD digital content from multiple sources to up to 200 remote displays on a LAN by cascading Ethernet switches up to 3 levels, allowing the farthest display to be located up to 1,000’ away from the 1080p source device while sustaining excellent picture & sound quality. Each device is installed using 1 piece of UTP or STP cable. AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss. The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different output displays can be at different resolutions). The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

NOTE: Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support 1 transmitter. A Power over Ethernet switch is required to provide power to the PoE Receiver.

Many-to-Many Home Theater Matrix

Projector Connector™ HD/IP™ Power over Ethernet Receiver Specifcations (VBS-HDMI-108POE)

1 UTP/STP 100Mbps Ethernet Port
1 HDMI Out (19 pin Type A female)
Protocol: IP, UDP, TCP, ICMP, and IGMP
1 3.5mm IR IR Transmitter Port (limited support)
Size: 6.25” W x 4.5” D x 1” H; 1.25 pounds
Class 2 PoE Device - 6 Watts
HDCP Compliant
Plug-and-Play installation
Supports DVI with HDMI-to-DVI adapter
Scaler automatically adjusts for each display
Video Bandwidth: 2.25Gbps (HDM1.3)
LAN Bandwidth: 50Mbps ~ 60Mbps for 1080p
Input TMDS Signal: 1.2 volts (peak-to-peak)
Input DDC Signal: 5 volts (peak-to-peak)

Resolutions - supports practically any input resolution and frequency from 16 x 16 to 2048 x 2048 pixel image including the following popular settings (NOTE the integrated scaler will automatically adjust the HDMI output to match the preferred resolution setting reported by the HDMI attached monitor):
640x480     @ 85fps    800x600     @ 85fps
1024x768   @ 75fps    1280x1024 @ 30fps
1600x1200 @ 30fps    720x480     @ 60fps
720x576     @ 50fps    1280x720   @ 30fps
1920x1080 @ 24fps    1920x1080 @ 60fps

Download an HD over IP Projector Connector Specifications Sheet

NOTICE: HD over IP and HD/IP are global trademarks or registered trademarks of Just Add Power Cardware Co., Inc. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Price: $399.00

IR Receiver/Eye for use with HD over IP Receivers

Fri, 12 Mar 2010 17:19:24 +0100

The Just Add Power HD™ over IP devices support a return IR signal. The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

Price: $20.00

IR Blaster/Emitter for use with HD over IP Transmitters

Fri, 12 Mar 2010 17:08:41 +0100

The 1G Just Add Power HD over IP™ devices support a return IR signal. The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

Price: $20.00