Just Add Power - Latest Products from Category: Meeting Rooms

Projector Connector™ Pass Through Receiver

Sat, 04 Jul 2009 20:46:25 +0100

This 4:3 and 16:9 aspect ratio receiver can be connected individually or in the middle of a daisy-chain to your choice of VBS Suite™ Type B compatible Transmitters. This "always on" receiver is for long distance applications up to 500 ft. There are 2 fine tuning knobs for focus and gain, allowing you to get the optimum picture quality with the longest of cable runs. You can then connect another Type B Receiver, to extend the audio/video signal up to 1500 ft (using 300M Extended Distance Receiver), or 700 ft (using Type B Standard Receivers).

Projector Connector™ Pass Through Receiver

1 UTP/STP VBS BUS In Ports - up to 150M
1 UTP/STP VBS BUS Out Ports - up to 300M
1 VGA Out; 1 Stereo Line Audio Out
100-240V, 50/60 Hz, AC Adapter - .5 Amp
2 Fine Tuning Knobs (Focus and Gain)
Total BUS Cable Distance up to 1,500’ (450 Meters)

Projector Connector Type B Specifications Sheet

Price: $250.00

Projector Connector™ Type B Passive Receiver

Sat, 04 Jul 2009 20:02:34 +0100

This 4:3 and 16:9 aspect ratio receiver can be connected individually or at the end of a daisy-chain to your choice of VBS Suite™ Type B compatible Transmitters. This "always on" receiver is available in several precisely tuned models to accommodate twisted pair cable lengths up to 60 Meters (200 ft.) for high resolution images. With high quality video grade twisted pair cables even longer distances can be achieved.

Receiver Specifications:

Outputs – VGA * 1, Stereo Audio * 1 (3.5mm mini-plug)

Power – 12V DC Adapter is included with Receiver

Connectivity – 1 Shielded RJ45 port (Shielded Twisted Pair cable recommended)

Models – 6 Standard STP Cable lengths supported:

10, 20, 30, 40, 50, or 60 Meters

Projector Connector Type B Specifications Sheet

Price: $150.00

Projector Connector™ Type B Extended Distance Receiver

Sat, 04 Jul 2009 20:07:46 +0100

This 4:3 and 16:9 aspect ratio receiver can be connected individually or at the end of a daisy-chain to your choice of VBS Suite™ Type B compatible Transmitters. This "always on" receiver is for long distance applications up to 1,000 ft. There are 3 fine tuning knobs for rough focus, fine focus, and gain, allowing you to get the optimum picture quality with the longest of cable runs.

Extended Distance Receiver Specifications:

Outputs – VGA * 1, Stereo Audio * 1 (3.5mm mini-plug)

Power – 12V DC Adapter is included with Receiver

Connectivity – 1 Shielded RJ45 port (Shielded Twisted Pair cable recommended)

Supports distances from 60M to 300M(200' to 1,000')

3 fine tuning knobs (Gain/Focus Adjust)

Projector Connector Type B Specifications Sheet

Price: $325.00

1G HD over IP Receiver

Fri, 01 Jan 2010 14:30:49 +0100

Download an HD over IP Projector Connector Specifications Sheet

The Projector Connector™ HDMI/IP™ allows you to simultaneously send out an HDMI® 1.3 Signal (up to 1080p) to one or more HDMI™ video projectors or LCD Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. Can be used to distribute HD digital content from multiple sources to up to 200 remote displays on a LAN by cascading Ethernet switches, , allowing the farthest display to be located 1,000’s of feet away from the 1080p source device while sustaining excellent picture & sound quality. Each device is installed using 1 piece of UTP or STP cable. AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss. The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different output displays can be at different resolutions). The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

NOTE: Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support 1 transmitter.

Not an HDMI Balun, but an HDMI over IP system. This means you can create your own A/V Ethernet network and all of the recievers will find the transmitter automatically. It may even be used over smaller existing house networks and low cost LAN switches and routers.

Many-to-Many Home Theater Matrix

Any HDMI source can simultaneously be diplayed on any number of display devices (if multiple displays are permitted by the HDMI source) using VLAN isolation on a Managed Ethernet switch. Using the HTTP GUI a PC (wired or wireless) can control what signal is being watched at each location. Sophisticated Home Theater installations can use a programmable console to control the system using RS232 commands. The Managed switch must support IGMP and permit duplicate IP addresses across the VLAN domains. You must use a third party home automation solution to provide distributed remote control functionality.

Projector Connector™ HD/IP Receiver Specifcations (VBS-HDMI-108A)

1 UTP/STP 100Mbps Ethernet Port
1 HDMI Out (19 pin Type A female)
Protocol: IP, UDP, TCP, ICMP, and IGMP
1 3.5mm IR IR Transmitter Port (limited support)
Size: 5” W x 4.5” D x 1” H; 1.1 pounds
100-240V, 50/60 Hz, 5v DC Adapter - 1 Amp
HDCP Compliant
Plug-and-Play installation
Supports DVI with HDMI-to-DVI adapter
Scaler automatically adjusts for each display
Video Bandwidth: 2.25Gbps (HDM1.3)
LAN Bandwidth: 50Mbps ~ 60Mbps for 1080p
Input TMDS Signal: 1.2 volts (peak-to-peak)
Input DDC Signal: 5 volts (peak-to-peak)

Resolutions - supports practically any input resolution and frequency from 16 x 16 to 2048 x 2048 pixel image including the following popular settings (NOTE the integrated scaler will automatically adjust the HDMI output to match the preferred resolution setting reported by the HDMI attached monitor):
640x480 @ 85fps 800x600 @ 85fps
1024x768 @ 75fps 1280x1024 @ 30fps
1600x1200 @ 30fps 720x480 @ 60fps
720x576 @ 50fps 1280x720 @ 30fps
1920x1080 @ 24fps 1920x1080 @ 60fps

Download an HD over IP Projector Connector Specifications Sheet

NOTICE: HD over IP and HD/IP are global trademarks or registered trademarks of Just Add Power Cardware Co., Inc. HDMI™, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Price: $299.00

MediaSwitcher Pro License

Sat, 17 Jul 2010 13:42:52 +0100

Just Add Software, LLC's MediaSwitcher™ Pro provides for fast and easy switching of video sources in a Just Add Power HD over IP™ matrix. Ideal for use in any application where the user desires control of the video matrix via TCP/IP, it can be used as a standalone system or it is compatible with any of the RS-232 based integrated control systems and can be used alongside them as a supplemental control system. TCP/IP offers the advantages of speed and also that control of the matrix can be performed from anywhere on the network, via wired or wireless connections. This allows greater control and flexibility for managing the switch. Pro Version 1.1 adds support for any sized video matrix with unlimited sources and screens (Just Add Power Gen1 systems limited to 200 screens). Currently switches from Cisco, Dell, Linksys, Netgear and D-Link are supported with plans to add more in the future.

Features of MediaSwitcher:

- Runs on Windows, Mac or Linux
- Supports an unlimited number of video sources
- Supports up to 200 screens for Gen 1 Just Add Power installations or unlimited screens for Gen 2 Just Add Power installations
- Supports an unlimited number of presets - a predefined source assignment for desired screen in the installation
- Supports an unlimited number of sequences - a sequences is a set of up to 20 presets that execute sequentially at given time intervals, time of day or both
- Provides a utility to automatically configure the VLANs on the switch and programs each port on the switch for optimal performance
- Supports switches from Cisco, Dell, Linksys, Netgear and D-Link with more to come
- Supports activation of controls via key pad entry allowing source, preset or sequence changes to be made from a remote keypad.
- Features a utility to reset individual ports on the switch should they require it.
- Features the ability to save a default configuration to the switch - allows the switch to come up with a default configuration in the event of a power failure/restart
- Fully supports PoE and features the ability to turn individual or all Just Add Power PoE receivers on or off
- Configuration files are comma delimited text files allowing a master template to be created for multiple sites - this template can then be loaded at each site for rapid deployment
- Ability to add custom branding/logos to the main user interface

System Requirements:

- Runs on nearly any modern platform - program uses minimal resources
- Minimum required screen width is 1024 pixels
- Mac platform requires OS X 10.4 or newer - PowerPC or Intel supported
- Windows platform requires Windows 2000 or newer

MediaSwitcher™ was developed by Just Add Software, LLC in cooperation with Just Add Power. This licensed software is based on Just Add Software's intellectual property and/or copyrighted content. This software is intended solely for use with Just Add Power devices by Just Add Power customers or dealers who have purchased their Just Add Power HDMI™ over IP equipment through authorized support channels. Any unauthorized use is strictly prohibited and will be prosecuted by Just Add Software and/or Just Add Power as violations of our copyrights and as theft of our confidential intellectual property.

Use of this software constitutes acceptance of the accompanying license agreement. Please read the license agreement prior to using this software.

NOTICE: HDMI™, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Price: $1,000.00

Video Genie™ DS1 3x10 Matrix Switch

Sat, 04 Jul 2009 20:19:59 +0100

The Video Genie™ DS series is the fourth generation of the Video Genie family. With 2 VGA (HDD15) inputs, plus a Microphone port, this matrix transmitter can simultaneously send either input to the 8 VBS Bus ports (Group A and Group B with up to 80 targets) and 2 local VGA ports. The new Video Genie DS1 includes an Infrared learning function (learns up to 48 IR commands), allowing the operator to perform the most common functions (play, pause, stop, etc.) without having to fumble with easily lost handheld IR remotes. The Video Genie™ DS1 is used to connect 2 computers (or HDMI/HDTV devices*) and common analog video devices (up to 4 VCR, DVD, Cameras, etc.) to VGA projectors and sound systems.

*HDTV/HDMI supported in 720p mode with the optional HDMI2VGA adapter and requires native signal compatible target devices.

Video Genie™ DS1 Specifications:
8 UTP/STP VBS Type B BUS Ports with RJ45 Terminators
2 VGA In (Supports 1600x 1200 UXGA)
2 VGA Out - Monitor & Projector
2 Stereo Line Audio In
1 Stereo Line Audio Out
1 Microphone In
1 AMP Line Out
1 RJ11 Panel Port for Console
2 RS232 Interface Port
4 RCA A/V Inputs
1 IR IN port for Learning IR Commands
4 IR OUT ports for IR Blasters (included)
Rack Mount Wings
100-240V, 50/60 Hz, AC Adapter - 1 Amp

VBS Suite Specifications Sheet

Price: $1,250.00

1G HD over IP Transmitter

Fri, 01 Jan 2010 14:20:21 +0100

Download an HD over IP Projector Connector Specifications Sheet

The Projector Connector™ HD/IP™ allows you to simultaneously send out an HDMI® 1.3 Signal (up to 1080p) to one or more HDMI™ video projectors or LCD Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. Can be used to distribute HD digital content from multiple sources to up to 200 displays on a LAN by cascading Ethernet switches, allowing the farthest display to be located 1,000’s of feet away from the 1080p source device while sustaining excellent picture & sound quality. Each device is installed using 1 piece of UTP or STP cable. AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss. The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different output displays can be at different resolutions). The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

NOTE: Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support 1 transmitter.

Many-to-Many Home Theater Matrix

Projector Connector™ HDMI/IP Transmitter Specifcations (VBS-HDMI-308A)

1 UTP/STP 100Mbps Ethernet Port
Embedded HTTP Server
Protocol: IP, UDP, TCP, ICMP, and IGMP
1 HDMI In (19 pin Type A female)
1 3.5mm IR Receiver Port (limited support)
Size: 5” W x 4.5” D x 1” H; 1.1 pounds
100-240V, 50/60 Hz, 5v DC Adapter - 1 Amp
HDCP Compliant
Plug-and-Play installation
Supports DVI with HDMI-to-DVI adapter
Video Bandwidth: 2.25Gbps (HDM1.3)
LAN Bandwidth: 50Mbps ~ 60Mbps for 1080p
Input TMDS Signal: 1.2 volts (peak-to-peak)
Input DDC Signal: 5 volts (peak-to-peak)

Resolutions - supports practically any input resolution and frequency from 16 x 16 to 2048 x 2048 pixel image including the following popular settings:
640x480     @ 85fps    800x600     @ 85fps
1024x768   @ 75fps    1280x1024 @ 30fps
1600x1200 @ 30fps    720x480     @ 60fps
720x576     @ 50fps    1280x720   @ 30fps
1920x1080 @ 24fps    1920x1080 @ 60fps

Download an HDMI over IP Projector Connector Specifications Sheet

Price: $350.00

MediaSwitcher Standard License

Sun, 09 May 2010 15:41:12 +0100

Just Add Software, LLC's MediaSwitcher™ Standard provides for fast and easy switching of video sources in a Just Add Power HD over IP™ matrix. Ideal for use in any application where the user desires control of the video matrix via TCP/IP, it can be used as a standalone system or it is compatible with any of the RS-232 based integrated control systems and can be used alongside them as a supplemental control system. TCP/IP offers the advantages of speed and also that control of the matrix can be performed from anywhere on the network, via wired or wireless connections. This allows greater control and flexibility for managing the switch. Standard Version 1.1 adds support for up to an 8x8 video matrix (the Pro version supports with unlimited sources and screens)Currently switches from Cisco, Dell, Linksys, Netgear and D-Link are supported with plans to add more in the future.

Features of MediaSwitcher Standard:

- Runs on Windows, Mac or Linux
- Supports up to 8 video sources
- Supports up to 8 screens
- Supports an unlimited number of presets - a predefined source assignment for desired screen in the installation
- Supports an unlimited number of sequences - a sequences is a set of up to 20 presets that execute sequentially at given time intervals, time of day or both
- Provides a utility to automatically configure the VLANs on the switch and programs each port on the switch for optimal performance
- Supports switches from Cisco, Dell, Linksys, Netgear and D-Link with more to come
- Supports activation of controls via key pad entry allowing source, preset or sequence changes to be made from a remote keypad.
- Features a utility to reset individual ports on the switch should they require it.
- Features the ability to save a default configuration to the switch - allows the switch to come up with a default configuration in the event of a power failure/restart
- Fully supports PoE and features the ability to turn individual or all Just Add Power PoE receivers on or off
- Configuration files are comma delimited text files allowing a master template to be created for multiple sites - this template can then be loaded at each site for rapid deployment
- Ability to add custom branding/logos to the main user interface

System Requirements:

Use of this software constitutes acceptance of the accompanying license agreement. Please read the license agreement prior to using this software.

NOTICE: HDMI™, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Price: $149.00

Projector Connector™ Type B Transmitter

Sat, 04 Jul 2009 19:53:12 +0100

The Point-To-Point Projector Connector Type B Transmitter allows you to simultaneously send a VGA Signal (up to 1280x1024) and a Stereo Audio Signal (3.5mm) to a video projector while only using 1 piece of UTP (Unshielded Twisted Pair) or STP (Shielded Twisted Pair) CAT5e or CAT6e cable. The system is precisely tuned to send a picture perfect image and stereo audio to the projector. Extends any VGA or high definition component display and analog L+R audio device up to 300 Meters*. This 4:3 and 16:9 aspect ratio transmitter can send Audio/Video to one or more VBS Suite™ Type B Receivers. Perfect for classroom and digital signage applications.

* The specific Type B Receiver purchased to go with the Transmitter will determine the supported cable distance. The Standard Type B Passive Receivers are available for STP cables up to 60M, and the the Extended Distance Type B Receiver is available to support cables up to 300M (1000').

Transmitter Specifications:

Inputs – VGA * 1 (PC or Laptop), Stereo Audio * 1 (3.5mm mini-plug)

Outputs – VGA * 1 (Local Computer Monitor), Stereo Audio * 1 (headset or desktop speakers)

Power – 12V DC Adapter is included with Transmitter

Connectivity – 1 Shielded RJ45 port (Shielded Twisted Pair cable recommended)

Projector Connector Type B Specifications Sheet

Price: $175.00

1G HD over IP Power over Ethernet Receiver

Thu, 04 Mar 2010 18:11:37 +0100

Download an HD over IP Projector Connector Specifications Sheet

The 1G HD over IP™ Power over Ethernet Receiver is part of the Projector Connector™ HDMI/IP™ family which allows you to simultaneously send out an HDMI® 1.3 Signal (up to 1080p) to one or more HDMI video projectors or LCD Panels and return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. Can be used to distribute HD digital content from multiple sources to up to 200 remote displays on a LAN by cascading Ethernet switches up to 3 levels, allowing the farthest display to be located up to 1,000’ away from the 1080p source device while sustaining excellent picture & sound quality. Each device is installed using 1 piece of UTP or STP cable. AV signals are transmitted digitally over the CAT5/6/7 cable without any signal loss. The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different output displays can be at different resolutions). The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

NOTE: Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support 1 transmitter. A Power over Ethernet switch is required to provide power to the PoE Receiver.

Many-to-Many Home Theater Matrix

Projector Connector™ HD/IP™ Power over Ethernet Receiver Specifcations (VBS-HDMI-108POE)

1 UTP/STP 100Mbps Ethernet Port
1 HDMI Out (19 pin Type A female)
Protocol: IP, UDP, TCP, ICMP, and IGMP
1 3.5mm IR IR Transmitter Port (limited support)
Size: 6.25” W x 4.5” D x 1” H; 1.25 pounds
Class 2 PoE Device - 6 Watts
HDCP Compliant
Plug-and-Play installation
Supports DVI with HDMI-to-DVI adapter
Scaler automatically adjusts for each display
Video Bandwidth: 2.25Gbps (HDM1.3)
LAN Bandwidth: 50Mbps ~ 60Mbps for 1080p
Input TMDS Signal: 1.2 volts (peak-to-peak)
Input DDC Signal: 5 volts (peak-to-peak)

Resolutions - supports practically any input resolution and frequency from 16 x 16 to 2048 x 2048 pixel image including the following popular settings (NOTE the integrated scaler will automatically adjust the HDMI output to match the preferred resolution setting reported by the HDMI attached monitor):
640x480     @ 85fps    800x600     @ 85fps
1024x768   @ 75fps    1280x1024 @ 30fps
1600x1200 @ 30fps    720x480     @ 60fps
720x576     @ 50fps    1280x720   @ 30fps
1920x1080 @ 24fps    1920x1080 @ 60fps

Download an HD over IP Projector Connector Specifications Sheet

NOTICE: HD over IP and HD/IP are global trademarks or registered trademarks of Just Add Power Cardware Co., Inc. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Price: $399.00

IR Receiver/Eye for use with HD over IP Receivers

Fri, 12 Mar 2010 17:19:24 +0100

The Just Add Power HD™ over IP devices support a return IR signal. The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

Price: $20.00

IR Blaster/Emitter for use with HD over IP Transmitters

Fri, 12 Mar 2010 17:08:41 +0100

The 1G Just Add Power HD over IP™ devices support a return IR signal. The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.

Price: $20.00

Dual Monitor VBS Type B Active Receiver

Sat, 04 Jul 2009 20:12:16 +0100

An Active Receiver can be attached to one or two output display devices and includes 2 local VGA IN ports (with sound), allowing the target presentation devices to display a local source with the DS transmitter is in BREAK mode. The Type B Active Receivers can be connected in daisy-chains allowing 10 and possibly more display monitors to be connected to a VBS Type B BUS port. A single Type B Passive Receiver can be connected to the end of an Active Receiver daisy-chain.

Dual Monitor Type B Active Receiver Specifications:

2 Stereo Line Audio In
2 Stereo Line Audio Out
2 VGA In (UXGA)
2 VGA Out
2 VBS Type B BUS IN/OUT Ports for CAT5e (UTP/STP)

Price: $225.00

Video Conference Upgrade for VBS/WCBS

Sat, 04 Jul 2009 20:30:31 +0100

An External Video Scaler for use with Projector Connector™ Type B Transmitter. Can be used to support a 2-way audio/video conference or "on the scene reporter" interview function when used in combination with the Video Genie. When used with Teacher's AIDE or EZ-Teach Silver, it gives you the ability to connect a DVD or other video source to the lab and broadcast it to the entire class.

Video Conference Upgrade Specifications:

Video standards: NTSC/PAL/SECAM (for Composite and S-video)
Resolution output: 640 x 480, 800 x 600, 1024 x 768, 1280 x 1024/1440 x 960 (60 Hz)
Local Monitor support: VGA/SVGA/XGA/SXGA (VGA input port required)
Input ports: coaxial (RF), composite video, S-video, composite audio, PC sound card line-out and 7.5 V / 1 A power port
Output ports: HD15 (VGA) and 3.5mm stereo output for connection to the Projector Connector Type B transmitter.
No driver or operating system requirements; compatible with Windows and Mac computers

Price: $100.00

Total Control Console™

Sat, 04 Jul 2009 19:23:37 +0100

The smooth sensor panel in the Total Control Console™ provides easy stand alone operation of the Video Genie™ DS system without requiring a dedicated PC to control the system.

Total Control Console™ Specifications:
1 SETUP Mode Key
4 Programmable Function Keys
5 Output Target Select Keys
12 Infrared Control Keys (can save 4 sets for 48 total IR commands)
6 Source Select Keys
1 Broadcast Key
1 Darken Key
1 Mute Key
1 Break/Reset Key
1 RJ11 Port for Video Genie™ DS Panel connection
9.5” W x 9.0” D x 1.75” H
Weight - 1 pound

VBS Suite Specifications Sheet

Price: $550.00