1G Firmware V.92 for large installations

Since September 2010, the 1G products have been built and shipped with the Just Add Power V.92 firmware that solved the memory leak that limited 1G Transmitters to about 8 screens at a time.  If you find a 1G device running the older V.90 firmware you can use these files to bring your 1G devices up to the current V.92 firmware.

The programming needed to support 200+ screens requires that the IR function be removed from the firmware.  Users with installations having less than 8 screens may prefer to use the original V.90 firmware to enable the IR ports.  We also include instructions on how to set the IP addresses on the 1G TX/RX (can be done with V.90 or V.92 devices).


File Size:1 MB